GUANGDONG XLC INDUSTRY CO. LIMITED

We XLC INDUSTRY, was founded in 1997. We mainly make different steel processing machines, like slitting line, cut to length line, laser cutting line, perforating and cutting line, decoiling and leveling machines, roll forming machines, etc. in past almost 30 years, we always aim on high quality, high technology, high level automatic, and after sales service. We have warehouse over 100,000 square meters, and more than 130 workers. Our annually sales is more than USD15,000,000 on different machines. Recent years we start to develop exporting business. We always do our best to provide best solution to customers on their needs.

More

Our advantages

  • Wide range of applications

    Wide range of applications

    The three-in-one feeder is divided into three types: thin plate, medium plate and thick plate, which are distinguished according to the thickness of the applicable materials. The thin plate three-in-one feeder is suitable for the automated production of thin plates with a thickness of 0.3-3.2m. It is mainly used in fine stamping applications such as computers, monitors, printers, air conditioners, set-top boxes, electronic digital, etc.

  • Easy to operate

    Easy to operate

    It truly realizes automation, greatly saves labor and reduces labor intensity. Although the split stamping production line can be automated during operation, it requires a series of manual operations such as loading, feeding, separate adjustments, test runs, and material changes, so it does not truly realize automated production, and the three-in-one stamping production line A feeder is a device that realizes automated operation.

  • Small space required

    Small space required

    Small space required The split stamping production line requires an equal material area between the machines, so customers need to reserve a large and long space when laying out the factory. Especially for materials above the medium plate, the space requirement is often about ten meters. , some even need to dig pits, and the precision three-in-one closing machine integrates these three machines into one. The body structure is compact, and the floor area is reduced by more than half compared with the traditional separate independent stamping production line, making the factory The space is fully utilized, and the operators also have enough operating space, without any discomfort during operation, and the safety of stamping production is maximized.

  • Save time

    Save time

    It would be more troublesome if we manually feed the materials. Some materials are more troublesome. We need to align the direction of the material feeding and feed the materials accurately. It usually takes seven or eight minutes to complete one piece of material. If you choose the automatic three-in-one feeder, it only takes more than ten seconds to complete a feeding action.

  • Save labor costs

    Save labor costs

    If we do large-scale mold production, some materials weigh several tons, so it can be imagined that several tons of materials require many people to complete the mold cutting. The labor cost that needs to be paid is a huge expense. However, we use our three-in-one punch machine With one feeder, only two people are needed to control the machine and the job can be completed!

  • Improve efficiency

    Improve efficiency

    In the old machinery production industry, there was no three-in-one feeder. The daily production volume of mold factories was more than a few hundred. However, many customers switched to mechanical production methods. Customers who purchased our three-in-one feeder said, The number of molds completed in one day can reach thousands, but the efficiency has improved 5-9 times more!